NEC 8M-B80AX1U 8M-B80AX1U Setup Manual - Page 10
Connecting with Another Device, Connecting an 8K Video Device Continue
View all NEC 8M-B80AX1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
TÜRKÇE ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Connecting an 8K Video Device (Continue) Supported format • 7680 x 4320 (24Hz, 25Hz, 30Hz, 50Hz, 60Hz) How to switch to 8K video input • PressINPUTon the remote control unitWhile the menu for input switching is displayed, useabcd to select"INPUT7"and press ENTER Channel indication when 8K video input is used • When 8K signal synchronized with INPUT7(A to D) is input, "4320p" is indicated as the video information. NOTE • If a signal that is not supported by this Monitor is input, "Out of range" is indicated. If this is the case, refer to the operating instructions of your PC or other devices to set an input signal supported by the Monitor. • If the input signals are not synchronized, video images are not displayed properly. Supported audio signal • Type: Linear PCM • Sampling frequency: 48kHz/44.1kHz/32kHz Connecting with Another Device Connecting with an HDMI Cable Rear side of Monitor Input 1, input 2, input 3, input 4 terminals HDMI output terminal-equipped device To HDMI output terminal HDMI cable (commercial item) Connected to an HDMI terminal Be sure to use a commercially available certified HDMI cable (high-speed type) that meets the standards. • Connect a 4K compatible device to input 1 of the Monitor. To view 4K 60p HDR/SDR video, connect with a Premium HDMI Cable. If a cable that does not meet the standards is used, image display, audio output, and AQUOS LINK may not be performed properly or noises may occur in images. NOTE • See page EN 3 to connect to an 8K output compatible device. EN 4