NEC HT510 HT510_510 UM - Page 48
Adjusting Horizontal/Vertical Position, Clock and Phase [Position/Clock], Selecting Aspect Ratio [
UPC - 050927248207
View all NEC HT510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
5. USING ON-SCREEN MENU Selecting Aspect Ratio [Aspect Ratio] Aspect Ratio allows you to select the best Aspect mode to display your source image. You can also display the Aspect Ratio window by pressing the ASPECT button on the remote control. (See page E-7). Normal Source is displayed in a 4:3 windowed area with black on the left and right. Full Sources fill the screen horizontally. Zoom Source is stretched vertically. Native Source is displayed in true aspect ratio. Source Computer Component VIDEO S-VIDEO Signal Normal Full RGB 1080i - - 720p - - 480p 576p 480i 576i For details on shaded areas, see the table below. Zoom - - - - - Native - - - - - - Input 4:3 source 16:9 source Mode Normal * Full * Zoom * * Recommended mode NOTE: A 16:9 screen should be used. Adjusting Horizontal/Vertical Position, Clock and Phase [Position/Clock] You can adjust the image manually for position and stability; "Horizontal", "Vertical", "Clock" and "Phase". [Horizontal/Vertical] Adjusts the image location horizontally and vertically. [Clock] (available for RGB signal only) Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This adjustment may be necessary when you connect your computer for the first time. [Phase] (available for RGB signal only) Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) Use "Phase" only after the "Clock" is complete. E-37