NEC PX-42VM3A User Manual - Page 36

Setting RGB3 ADJ. When the picture input from the RGB3 input terminal is distorted, select the most appropriate setting from among "1", "2", and "3". Example: Setting "2" Press the PROCEED button on the remote control to display MAIN MENU on the screen, then... 1. Use the L and M buttons to select "FUNCTION", then press the PROCEED button. The "FUNCTION" screen appears. 2. Use the L and M buttons to select "RGB3 ADJ.". FUNCTION OSM OSM ADJ. POWER MGT GRAY LEVEL CINEMA MODE RGB3 ADJ. : ON : 1 : OFF : 3 : ON : 1 LONG LIFE RESET SEL. ADJ. EXIT RETURN 3. To select "2"... Use the ᮤ and ᮣ buttons to select "2". The mode switches as follows each time the ᮤ or ᮣ buton is pressed: → 1 ↔ 2 ↔ 3 ← FUNCTION OSM : ON OSM ADJ. POWER MGT GRAY LEVEL CINEMA MODE RGB3 ADJ. : 1 : OFF : 3 : ON : 2 LONG LIFE RESET SEL. ADJ. EXIT RETURN 4. Once the setting is completed... Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information Ⅵ When you adjust the RGB3 ADJ. The position of the menu display will change. In such a case, be sure to adjust the position. Ⅵ Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. Reducing burn-in of the screen The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce burn-in of the screen. Example: Setting "PLE" to "LOCK" Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then proceed as follows. 1. Use the L and M buttons to select "FUNCTION", then press the PROCEED button. The "FUNCTION" screen appears. 2. Use the L and M buttons to select "LONG LIFE", then press the PROCEED button. FUNCTION OSM : ON OSM ADJ. : 1 POWER MGT : OFF GRAY LEVEL : 3 CINEMA MODE : ON RGB3 ADJ. : 1 LONG LIFE RESET SEL. PROCEED OK EXIT RETURN The "LONG LIFE" screen appears. 3. Use the L and M buttons to select "PLE". LONG LIFE PLE : AUTO ORBITER : OFF INVERSE : OFF SCREEN WIPER : OFF SEL. ADJ. EXIT RETURN 4. Use the ᮤ and ᮣ buttons to select "LOCK". The mode switches as follows each time the ᮤ or ᮣ button is pressed: AUTO ↔ LOCK LONG LIFE PLE : LOCK ORBITER : OFF INVERSE : OFF SCREEN WIPER : OFF SEL. ADJ. EXIT RETURN E-30