NEC PX-42VM3A User Manual - Page 37

5. Once the setting is completed... Press the EXIT button to return to the FUNCTION menu. To exit the main menu, press the EXIT button twice. Information Ⅵ PLE AUTO The brightness of the screen is adjusted automatically to suit the picture quality. LOCK The brightness level is set to minimum. Ⅵ ORBITER OFF Orbiter mode does not function. ON The picture moves around the screen intermittently. Ⅵ INVERSE OFF Inverse mode does not function. ON The picture is displayed alternately between positive image and negative image. You can set the time by pressing the PROCEED button while "ON" is set. WT The entire screen turns white. You can set the time by pressing the PROCEED button while "ON" is set. Ⅵ SCREEN WIPER OFF Screen wiper mode does not function. ON Repeatedly moves the white vertical bar from the left end of the screen to the right end at a constant speed. You can set the time by pressing the PROCEED button while "ON" is set. Ⅵ Restoring the factory default settings Select "RESET" from the function menu. Note that this also restores other settings to the factory defaults. * Only the PLE and ORBITER can be adjusted when a RGB signal is connected. Setting the time for "INVERSE" Set the "INVERSE" or "WHITE" display time and the "WAITING TIME". Example: Setting so that the INVERSE mode starts in 30 minutes and proceeds for one and a half hours. Perform Steps 1-2 on Page E-30, then 3. Use the L and M buttons to select "INVERSE", then use the ᮤ and ᮣ buttons to select "ON". LONG LIFE PLE : AUTO ORBITER : OFF INVERSE : ON SCREEN WIPER : OFF SEL. PROCEED OK EXIT RETURN 4. Press the PROCEED button. The "INVERSE/WT" screen appears. INVERSE/WT WORKING TIME : ON SEL. ADJ. EXIT RETURN 5. Adjust the time using the ᮤ and ᮣ buttons and the L and M buttons. The mode switches as follows each time the ᮤ or ᮣ button is pressed. INVERSE/WT WORKING TIME : 1H : 30M WAITING TIME : 0H : 30M SEL. ADJ. EXIT RETURN The 1st line of the "WORKING TIME": → ON or 0H ↔ 1H ↔ 2H ↔ 3H 12H ← * The "WORKING TIME" (minutes) and "WAITING TIME" cannot be set when the "WORKING TIME" is "ON". E-31