NEC PX-42VM3A User Manual - Page 39

The 2nd line of the "WORKING TIME": → 0M ↔ 3M ↔ 6M ↔ 9M 57M← The 1st line of the "WAITING TIME": → 0H ↔1H ↔ 2H ↔ 3H 12H← The 2nd line of the "WAITING TIME": → 0M ↔ 3M ↔ 6M ↔ 9M 57M← "SPEED": → 1↔ 2 ↔ 3 ↔ 4 ↔ 5← 6. Once the setting is completed... Press the EXIT button several times to return to the main menu. To delete the main menu, press the EXIT button once more. Information Ⅵ Setting the time WORKING TIME Set the length of time the "SCREEN WIPER" mode lasts. When the WORKING TIME is set to "ON", the "SCREEN WIPER" mode stays in the state. WAITING TIME Set the length of time until the "SCREEN WIPER" mode starts. SPEED Set the moving speed for the "SCREEN WIPER". The speed decreases as the number increases. * The "WORKING TIME" and "WAITING TIME" can be set for up to 12 hours and 45 minutes in units of 3 minutes. Ⅵ To select "ON" for "WORKING TIME"... Set the hours of the "WORKING TIME" to 0H and the minutes to 0M. "ON" will be displayed. Resetting to the default values Use these operations to restore all the picture adjustments, audio settings, to the factory default values. Refer to page E-17 for items to be reset. Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then... 1. Use the L and M buttons to select "FUNCTION", then press the PROCEED button. The "FUNCTION" screen appears. 2. Use the L and M buttons to select "RESET", then press the PROCEED button. FUNCTION OSM OSM ADJ. POWER MGT GRAY LEVEL CINEMA MODE RGB3 ADJ. : ON : 1 : OFF : 3 : ON : 1 LONG LIFE RESET SEL. PROCEED OK EXIT RETURN The "RESET" screen appears. 3. Use the L and M buttons to select "RESET", then press the PROCEED button. RESET RETURN RESET PROCEED OK EXIT RETURN RESET SETTING NOW When the "SETTING NOW" screen disappears, the screen will be restored to the previous "RESET" mode, then all the settings are restored to the default values. 4. Once the setting is completed ... Press the EXIT button. To delete the main menu, press the EXIT button once more. E-33