Navigon 10000130 User Guide - Page 25
Initializing the GPS receiver, Setting the volume, GPS Ready, Caution
UPC - 898110001044
View all Navigon 10000130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Initializing the GPS receiver Basic Operations Starting the NAVIGON 5100 Note: It can take up to 20 minutes to initialize the integrated GPS receiver for the first time. Each time you turn on the device, GPS reception starts within one minute. If the navigation device has been switched off for more than a week, the next initialization can take up to 10 minutes. As soon as the navigation device has been switched on, initialization of the GPS receiver begins. In the upper right-hand corner of the display, the GPS symbol appears. As soon as data from at least 3 satellites is received, the symbol changes to GPS Ready. Note: If the GPS symbol displays GPS Ready after considerably less than 20 minutes, it is advisable to leave the receiver switched on for at least an additional 15 minutes to ensure reliable operation. Caution! If you have connected the navigation device to the power supply via the vehicle's cigarette lighter, remove the connector before you leave the vehicle standing for a longer period of time. As the GPS receiver requires a constant supply of power, it could drain the vehicle´s battery. Setting the volume The volume of the spoken driving instructions can be adjusted during navigation. With a map displayed: 1. Tap (Volume). The volume bar opens. It contains three buttons for adjusting the volume: (Louder), (Quieter), (Volume on/off). 2. Tap (Volume) again. The volume bar closes. January 2008 NAVIGON 5100 User's Guide 13 Revision 2.0 NAVIGON, INC.