Netgear AX1750 User Manual - Page 41
Con a router with advanced MAC settings to work with your extender
View all Netgear AX1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
AX1750 4-Stream WiFi 6 Mesh Extender GHz band is used to connect the extender to the WiFi router. Use this mode if your WiFi router supports the 5 GHz band, but the devices that you want to use for gaming and streaming support the 2.4 GHz band. 8. Click the SAVE button. Your changes are saved. Configure a router with advanced MAC settings to work with your extender If you enabled a WiFi MAC filter, WiFi access control, or access control list (ACL) on your router, when a WiFi device connects through the extender to your router, the MAC address of the WiFi device shown on the router is translated to another MAC address. If your router's MAC filter, WiFi access control, or ACL is enabled, the WiFi device connects to the extender but cannot get an IP address from the extender and cannot access the Internet. To allow the WiFi device to receive an IP address from the extender and access the Internet, you must provide translated MAC address to the router. To add a translated MAC address to your router and reserve an IP address for your extender 1. Log in to your router and disable the MAC filter, WiFi access control, or ACL. For more information about how to disable your router's MAC filter, WiFi access control, or ACL, see your router's documentation. 2. Power on the extender and connect all of your WiFi devices to the extender. 3. Make sure that the Router Link LED remains lit. Extender Network Settings 41 User Manual