Netgear DGFV338 Hub and Spoke VPN network using the VPN Prosafe Client - Page 1
Netgear DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router Manual
View all Netgear DGFV338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Hub and Spoke VPN using the VPN Prosafe Client This document describes the steps to undertake in configuring a Hub-and-Spoke network over the Internet using VPNs (box-to-box and client-to-box). In particular it describes how to allow VPN clients (Spoke) to access Remote LANs (Spokes) via a single VPN connection to a central (Hub) Firewall/Router. The configuration can apply to any of the VPN Firewall/Router from firmware version 3.5.0.24 and above, and VPN clients from version 10.8.3 and above. The diagram below shows a typical scenario. FVS338 (Spoke 1) Public IP: 83.71.251.20 LAN IP : 172.22.102.102 VPN Information: BoxToBox (To FVX538) LAN2toClient (FVS338 To VPN clients via FVX538) Client connection to LAN 2 via VPN Client connection to LAN1 Spoke 2 192.168.0.x/24 VPN Client to Box connection (mode config) LAN2 VPN Box to Box connection Internet FVX538 Public IP: 83.71.251.19 LAN IP: 172.22.101.101 VPN Information: BoxToBox (To FVS338) LAN1toVPN (FVX538 To VPN clients) LAN2toClient (VPN Clients to FVS338 via FVX538) LAN1 LAN1 Version 1.0