Netgear DGFV338 Hub and Spoke VPN network using the VPN Prosafe Client - Page 3

NETWORK SETUP Physical setup FVX538 connected to the Internet via a modem or modem/router FVS338 connected to the Internet via a modem or modem/router VPN Client PCs connected Wireless/Wired to the Internet (via a LAN allowing IPSEC traffic) Logical setup FVX538 LAN IP: 172.22.101.101/24 DHCP: 172.22.101.0/24 Mode Config DHCP: 192.168.0.0/24 Firmware version: 3.5.0.24 FVS338 LAN IP: 172.22.102.102/24 DHCP: 172.22.102.0/24 Firmware version: 3.5.0.24 VPN Client Version: 10.8.3 NIC IP: 192.168.0.x/24 VPN configuration The setup will require the creation of multiple VPN policies: FVX538 - 1x Box-to-box policy from the FVX538 to the FVS338 (Policy name: BoxtoBox) - 1x Client-to-Box policy on the FVX538 to connect to the VPN clients (Policy name: LAN1toVPN) - 1x Manual VPN policy using the IKE policy used for the box-to-box connection to allow the VPN clients to connect to the LAN behind the FVS338 (Policy name: LAN2toClient) FVS338 - 1x Box-to-box policy from the FVS338 to the FVX538 (Policy name: BoxtoBox) - 1x Manual VPN policy using the IKE policy used for the box-to-box connection to allow the FVS338 to connect to the VPN clients (Policy name: LAN2toClient) VPN Client - 1x Policy connecting to the Public address of the FVS338 specifying as the IP range for the Remote party 172.22.0.0 mask 255.255.0.0 (class full only mask accepted) Version 1.0