Netgear EN108 EN104 Installation Guide - Page 12
Connect to a Network Using the AUI Port
View all Netgear EN108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connect to a Network Using the AUI Port The AUI port on the rear panel (found only on the Model EN108 hub and the Model EN116 hub) is normally used for connecting a thick coaxial segment. With the right type of transceiver, you can use the AUI port to connect to most types of network media, including 10BASE-T twisted pair cable or thin coaxial, thick coaxial, and 10BASE-FL fiber optic cables. Note: All transceivers connected to the AUI port must have the signal quality error (SQE) test function disabled. Refer to your transceiver documentation for information about disabling the SQE test function. Thick coaxial cable Cable terminator device AUI cable 10BASE-5 transceiver Model EN108 hub and Model EN116 hubs 8737FA Note: Ethernet specifications limit thick coaxial segments to 100 stations and 1,640 feet (500 m) in length, and they specify that the AUI cable between the hub and the transceiver is limited to 164 feet (50 m). Model EN104/EN108/EN116 Ethernet Hub Installation Guide