Netgear EN108 EN104 Installation Guide - Page 13
Verify Installation, The green Active LED on each connected AUI port is on.
View all Netgear EN108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Verify Installation To complete the installation, connect the power cord first to the power receptacle on the hub rear panel and then to the power outlet on the wall. When power has been applied to the hub: • The green Pwr (Power) LED on the front panel is on. • The green Link LED on each connected port is on. • The green Active LED on each connected AUI port is on. • The green Active LED on each connected BNC port is on. If encounter any problems, refer to "Troubleshooting" on page 4. Model EN104/EN108/EN116 Ethernet Hub Installation Guide
Model EN104/EN108/EN116 Ethernet Hub Installation Guide
To complete the installation, connect the power cord first to the power receptacle
on the hub rear panel and then to the power outlet on the wall. When power has
been applied to the hub:
•
The green Pwr (Power) LED on the front panel is on.
•
The green Link LED on each connected port is on.
•
The green Active LED on each connected AUI port is on.
•
The green Active LED on each connected BNC port is on.
If encounter any problems, refer to “Troubleshooting” on page 4.
Verify Installation