Netgear EN108 EN104 Installation Guide - Page 8
Connect a PC to the Hub, Normal/Uplink push button to Normal. - model
View all Netgear EN108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connect a PC to the Hub You can connect PCs, Apple Macintosh computers, UNIX workstations, or any device equipped with a 10BASE-T Ethernet interface to the RJ-45 ports on your hub by using twisted pair Ethernet cables. To connect any of the RJ-45 ports on your hub to a PC, use a regular straightthrough UTP cable. If you are connecting using port 4 on the Model EN104 hub, port 8 on the Model EN108 hub, or port 16 on the Model EN116 hub, set the Normal/Uplink push button to Normal. (The Model EN108 hub is shown in the illustration.) Pwr Col 1 2 3 4 5 6 Normal/Uplink 7 8 8734FA Note: Ethernet specifications limit the cable length between your PC or server and the hub to 328 feet (100 meters) in length. Model EN104/EN108/EN116 Ethernet Hub Installation Guide