Netgear GSM7324 FSM7326P Hardware manual - Page 13

Managed Layer 3 Switches FSM7326P, GSM7312, and GSM7324 Hardware Installation Guide GSM7324 Front Panel and LEDs The following figure shows the front panel of the GSM7324. The front panel contains LEDs, RJ-45 jacks, SFP module bays, and a console. LEDs Figure 2-5 RJ-45 jacks SFP module bays Console port The following table describes the GSM7324 LEDs on the front of the switch. Table 2-3. GSM7324 LED Description LED Power Fan Status 10/100/1000 Mbps port: Link/Act SPF port (1,000 Mbps only) Description • Green: Power supply is present and operating normally. • Yellow: Power supply is present, but failed. • Off: Power supply is not present. • Red: Fan has failed. • Off: Fan is working. • Green: Switch is operating normally. • Yellow: Switch has failed to boot up. Link (left) • Green: Link in 1,000 Mbps. • Yellow: Link in 100 Mbps. • Off: Link in 10 Mbps. Act (right) • Solid green: Link up. • Blinking green: Activity, transmitting or receiving a packet in link up state. • Off: No link detected. • Solid green: Link up. • Blinking green: Activity, transmitting or receiving a packet in link up state. • Off: No link detected. Introduction 2-5 v1.0, March 2006