Netgear GSM7324 FSM7326P Hardware manual - Page 25

Managed Layer 3 Switches FSM7326P, GSM7312, and GSM7324 Hardware Installation Guide 4. Configure the terminal-emulation program to use the following settings: • Baud rate: 9,600 bps • Data bits: 8 • Parity: none • Stop bit: 1 • Flow control: none After you connect a console to the switch, you will need to configure the switch. The following documents are provided for this purpose: • Quick Install Guide: Explains basic setup and configuration (provided as both as a print document, and in PDF format on the NETGEAR CD) • Command Line Interface Reference for Layer-3 Switches: Gives detailed examples of how to use the CLI, and is located on the NETGEAR CD. • Administration Manual for the Layer-3 Switches: Describes configuration tasks, and is located on the NETGEAR CD. Hardware Installation 3-9 v1.0, March 2006