Netgear GSM7328SNA 7000 Series Managed Switch Administration Guide for Softwar - Page 340
CLI: Enable a Double VLAN, Web Interface: Enable a Double VLAN, Create static VLAN 200
UPC - 606449042979
View all Netgear GSM7328SNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
ProSafe 7000 Managed Switch Release 8.0.3 The following example shows how to configure the NETGEAR switch shown in the preceding figure to add a double VLAN tag for traffic going from the subnet domain connected to port 1/0/24. This example assumes there is a Layer 2 switch connecting all these devices in your domain. The Layer 2 switch tags the packet going to the NETGEAR switch port 1/0/24. The example is shown as CLI commands and as a Web interface procedure. CLI: Enable a Double VLAN Create a VLAN 200. (Netgear Switch)#vlan database (Netgear Switch) (Vlan)#vlan 200 (Netgear Switch) (Vlan)#exit Add interface 1/0/24 to VLAN 200, add pvid 200 to port. (Netgear Switch) #config (Netgear Switch) (Config)#interface 1/0/24 (Netgear Switch) (Interface 1/0/24)#vlan pvid 200 (Netgear Switch) (Interface 1/0/24)#vlan participation include 200 (Netgear Switch) (Interface 1/0/24)#exit Add interface 1/0/48 to the VLAN 200 in a tagging mode. (Netgear Switch) (Config)#interface 1/0/48 (Netgear Switch) (Interface 1/0/48)#vlan participation include 200 (Netgear Switch) (Interface 1/0/48)#vlan tagging 200 (Netgear Switch) (Interface 1/0/48)#exit Select interface 1/0/48 as the provider port. (Netgear Switch) (Config)# (Netgear Switch) (Config)#interface 1/0/48 (Netgear Switch) (Interface 1/0/48)#mode dvlan-tunnel (Netgear Switch) (Interface 1/0/48)#exit Web Interface: Enable a Double VLAN 1. Create static VLAN 200: 340 | Chapter 22. Double VLANs and Private VLAN Groups