Netgear GSM7328SNA 7000 Series Managed Switch Administration Guide for Softwar - Page 369
IPv6 Interface Configuration, ProSafe 7000 Managed Switch Release 8.0.3
UPC - 606449042979
View all Netgear GSM7328SNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 369 highlights
ProSafe 7000 Managed Switch Release 8.0.3 3. Assign IPv6 address 2000::1/64 to VLAN 500 and enable IPv6 routing. (Netgear Switch) (Config)#interface vlan 0/4/1 (Netgear Switch) (Interface 0/4/1)#routing (Netgear Switch) (Interface 0/4/1)#ipv6 enable (Netgear Switch) (Interface 0/4/1)#ipv6 address 2000::1/64 (Netgear Switch) (Interface 0/4/1)#exit 4. Enable IPV6 forwarding and unicast routing on the switch. (Netgear Switch) (Config)#ipv6 forwarding (Netgear Switch) (Config)#ipv6 unicast-routing (Netgear Switch) #ping ipv6 2000::2 Send count=3, Receive count=3 from 2000::2 Average round trip time = 1.00 ms (Netgear Switch) #show ipv6 brief IPv6 Forwarding Mode Enable IPv6 Unicast Routing Mode Enable IPv6 Hop Limit 0 ICMPv6 Rate Limit Error Interval 1000 msec ICMPv6 Rate Limit Burst Size 100 messages Maximum Routes 128 (Netgear Switch) #show ipv6 interface 0/4/1 IPv6 is enabled IPv6 Prefix is FE80::21E:2AFF:FED9:249B/128 2000::1/64 Routing Mode Enabled Administrative Mode Enabled IPv6 Routing Operational Mode Enabled Bandwidth 10000 kbps Interface Maximum Transmit Unit 1500 Router Duplicate Address Detection Transmits... 1 Router Advertisement NS Interval 0 Router Advertisement Lifetime 1800 Router Advertisement Reachable Time 0 Router Advertisement Interval 600 Router Advertisement Managed Config Flag....... Disabled Router Advertisement Other Config Flag......... Disabled Router Advertisement Suppress Flag Disabled IPv6 Destination Unreachables Enabled Prefix 2000::1/64 Preferred Lifetime 604800 Valid Lifetime 2592000 Onlink Flag Enabled Autonomous Flag Enabled Chapter 25. IPv6 Interface Configuration | 369