Netgear WC7600 Installation Guide - Page 13

LED Description 2.4 Ghz 2.4 Ghz traffic on the WLAN. 5 Ghz 5 Ghz traffic on the WLAN. The Discovery Wizard can discover access points that are either in factory default state or already deployed and running. For the Discovery Wizard to discover access points across a Layer 2 network, Layer 3 network (behind a router), or remote access points, the following requirements apply: • Your network must have a DHCP server that has option 43 enabled with the IP address of the wireless controller, or the DHCP server on the wireless controller must be accessible to all access points. • Each access point must have an IP address. • Each access point must have SNMP and SSH enabled (which is the default). • UDP port number 7890 must be unblocked by your firewall.  To discover access points: 1. Access the wireless controller at the network IP address that you configured (see Configure the Basic Settings). 2. Select Access Point > Discovery > Discovery Wizard. 13