Netgear WGE111 WGE111 Reference Manual - Page 20
Game Console Plug-and-Go Scenario, What you need. - setup wizard
View all Netgear WGE111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
User Manual for the NETGEAR WGE111 Wireless Game Adapter Game Console Plug-and-Go Scenario WGE111 Wireless Game Adapter AB Gaming Console or other Ethernet-enabled device Figure 3-2: Internet Game Console Scenario What you need. • Broadband Internet access through a router with an 802.11b or 802.11g wireless access point (built in to the router or separate) without any security features enabled. Note: If you enabled security features (like WEP, SSID broadcast off, MAC filtering, etc.) you need to follow the instructions given in "Using the NETGEAR Smart Wizard Configuration Assistant" on page 3-9. • A network-enabled game console. What you do. 1. Connect the Ethernet cable from your WGE111 Wireless Game Adapter (A) to the Ethernet port (B) in the game console. 2. Make sure that the switch on the back of the WGE111 is set to the left side (labeled Internet), which corresponds to Infrastructure Mode. 3. Connect the power adapter to the WGE111 and verify the following: • The power light goes on. • The Internet light is lit. • The Ethernet light is lit when connected to a network-enabled game console. 3-4 Basic Setup