Netgear WGE111 WGE111 Reference Manual - Page 36
Data Rate, Network Name SSID, Wireless Security, Using WEP Security Encryption - access point
View all Netgear WGE111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
User Manual for the NETGEAR WGE111 Wireless Game Adapter Data Rate Select the desired data rate. The options are: • Auto - the data rate will be detected automatically (g or b). • b only - operates in 802.11b mode only. The data rate is set to Auto by default. Network Name (SSID) Choose a descriptive name for the WGE111 Wireless Game Adapter for identification purposes. ANY is the factory default name for Infrastructure mode, which is a special name that will connect with whatever access point or router's signal is strongest. Enter a value of up to 32 alphanumeric characters, or click the Select AP to choose an available Access Point. Spaces are not allowed, but dashes (-) and underscore marks (_) are accepted. The SSID must be the same as the Access Point you want to connect to. This value is also case-sensitive. For example, NETGEAR is not the same as NETGEAr. Wireless Security Select the option to match the Access Point; the screen will change according to the option selected: • Disable - no data encryption. • WEP (Wired Equivalent Privacy) - use WEP 64 or 128 bit data encryption. See the next section, "Using WEP Security Encryption" on page 4-7 for detailed information. • WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) - use WPA-PSK standard encryption. See "Using WPA-PSK Security Encryption" on page 4-7 for detailed information. 4-6 Web Configuration