Netgear WGT624SC WGT624v3 Reference Manual - Page 111
Verifying TCP/IP Properties for Macintosh Computers
View all Netgear WGT624SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3 2. If not already selected, select Built-in Ethernet in the Configure list. 3. If not already selected, Select Using DHCP in the TCP/IP tab. 4. Click Save. Verifying TCP/IP Properties for Macintosh Computers After your Macintosh is configured and has rebooted, you can check the TCP/IP configuration by returning to the TCP/IP Control Panel. From the Apple menu, select Control Panels, then TCP/IP. The panel is updated to show your settings, which should match the values below if you are using the default TCP/IP settings that NETGEAR recommends: • The IP Address is between 192.168.1.2 and 192.168.1.254 • The Subnet mask is 255.255.255.0 • The Router address is 192.168.1.1 If you do not see these values, you may need to restart your Macintosh or you may need to switch the "Configure" setting to a different option, then back again to "Using DHCP Server". Preparing Your Network 202-10090-01, April 2005 C-17