Netgear WGT624SC WGT624v3 Reference Manual - Page 38
Scheduling When Blocking Will Be Enforced, Configuring Services Blocking by IP Address Range
View all Netgear WGT624SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3 Enter the Starting Port and Ending Port numbers. If the application uses a single port number, enter that number in both boxes. If you know that the application uses either TCP or UDP, select the appropriate protocol. If you are not sure, select Both. • Configuring Services Blocking by IP Address Range Under "Filter Services For", you can block the specified service for a single PC, a range of PCs (having consecutive IP addresses), or all PCs on your network. Scheduling When Blocking Will Be Enforced The WGT624 v3 wireless router allows you to specify when blocking will be enforced. The Schedule menu is shown below: Figure 4-4: Schedule menu Use this check boxes on this menu to create a schedule for blocking content. Click Apply. • Days to Block. Select days to block by checking the appropriate boxes. Select Everyday to check the boxes for all days. Click Apply. 4-4 Content Filtering 202-10090-01, April 2005