Netgear WNR2000v1 WNR2000 User Manual - Page 87
Port Triggering, Disable Port Triggering, Port Triggering Timeout, has terminated.
View all Netgear WNR2000v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
NETGEAR Wireless-N Router WNR2000 User Manual 2. Select the Port Triggering radio button. The port triggering information displays. Figure 5-4 3. Clear the Disable Port Triggering check box. Note: If the Disable Port Triggering check box is selected after you configure port triggering, port triggering is disabled. However, any port triggering configuration information you added to the router is retained even though it is not used. 4. In the Port Triggering Timeout field, enter a value up to 9999 minutes. This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity time expires. This is required because the router cannot be sure when the application has terminated. Fine-Tuning Your Network v1.3, February 2009 5-11