Netgear WNR2000v1 WNR2000 User Manual - Page 99

QoS for a MAC Address, Editing or Deleting an Existing QoS Policy, QoS Setup, Add Priority Rule

Page 99 highlights

NETGEAR Wireless-N Router WNR2000 User Manual QoS for a MAC Address To create a QoS policy for traffic from a specific MAC address: 1. From the main menu, under Advanced, select QoS Setup. The QoS Setup screen displays, as shown in Figure 5-8 on page 5-19. 2. Click Add Priority Rule. 3. From the Priority Category list, select MAC Address. The QoS - Priority Rules screen changes: Figure 5-13 4. If the device to be prioritized appears in the MAC Device List, select it. The information from the MAC Device List is used to populate the policy name, MAC Address, and Device Name fields. If the device does not appear in the MAC Device List, click Refresh. If it still does not appear, you must complete these fields manually. 5. From the Priority drop-down list, select the priority that this device's traffic should receive relative to other applications and traffic when accessing the Internet. The options are Low, Normal, High, and Highest. 6. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen. 7. In the QoS Setup screen, select the Turn Internet Access QoS On check box. 8. Click Apply. Editing or Deleting an Existing QoS Policy To edit or delete an existing QoS policy: 1. From the main menu, under Advanced, select QoS Setup. The QoS Setup screen displays, as shown in Figure 5-8 on page 5-19. Fine-Tuning Your Network v1.3, February 2009 5-23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

NETGEAR Wireless-N Router WNR2000 User Manual
Fine-Tuning Your Network
5-23
v1.3, February 2009
QoS for a MAC Address
To create a QoS policy for traffic from a specific MAC address:
1.
From the main menu, under Advanced, select
QoS Setup
. The QoS Setup screen displays, as
shown in
Figure 5-8 on page 5-19
.
2.
Click
Add Priority Rule
.
3.
From the
Priority Category
list, select
MAC Address
. The QoS - Priority Rules screen
changes:
4.
If the device to be prioritized appears in the MAC Device List, select it. The information from
the MAC Device List is used to populate the policy name, MAC Address, and Device Name
fields. If the device does not appear in the MAC Device List, click
Refresh
. If it still does not
appear, you must complete these fields manually.
5.
From the
Priority
drop-down list, select the priority that this device’s traffic should receive
relative to other applications and traffic when accessing the Internet. The options are Low,
Normal, High, and Highest.
6.
Click
Apply
to save this rule to the QoS Policy list and return to the QoS Setup screen.
7.
In the QoS Setup screen, select the
Turn Internet Access QoS On
check box.
8.
Click
Apply
.
Editing or Deleting an Existing QoS Policy
To edit or delete an existing QoS policy:
1.
From the main menu, under Advanced, select
QoS Setup
. The QoS Setup screen displays, as
shown in
Figure 5-8 on page 5-19
.
Figure 5-13