Nikon 2170749 Instruction Manual - Page 35

Optional Accessories Soft Case • [ Two camera cases are available for this camera. • CS-27: Camera body fits inside case with IX30-60mm f/4-5.6 lens attached. • CS-28: Camera body fits inside case with IX60-180mm f/4.5-5.6 lens attached. Power Pack MB-11 • [ When Power Pack MB-11 is attached to the bottom of the PRONEA S, four AA-type alkaline-manganese or lithium batteries can be used to power the PRONEA S. AA-type batteries are widely available compared to CR2 batteries, and lithium batteries enable you to shoot more rolls of film and yield stable performance in lower temperatures. IX-Nikkor/AF Nikkor Lens • IX-Nikkor 30-60mm f/4-5.6, 60-180mm f/4.5-5.6, 20-60mm f/3.5-5.6, 24-70mm f/3.5-5.6 and 60-180mm f/4-5.6 lenses are available exclusively for Nikon PRONEA cameras. Also, various AF Nikkor lenses, from 16mm fisheye to 600mm telephoto, are available. Most AF Nikkor lenses can be used with this camera. Filters Nikon offers a range of filters including the NC filter for lens protection, and the Circular Polarizing Filter C-PL for special effects. Wireless Slave Flash Controller SU-4 TTL multi-flash, where an optional Speedlight is fired simultaneously with the built-in Speedlight, is possible with the Wireless Slave Flash Controller SU-4. Bracket SK-7 • Bracket SK-7 enables you to attach a TTL Speedlight unit connected to Wireless Slave Flash Controller SU-4 next to the PRONEA S. 70 Camera Care WARNING Do not use Do NOT ever use organic solvents like thinner or benzene. They are flammable and hazardous to your health, and can cause damage to the camera. • Cleaning camera body Use a blower brush to remove dirt and dust from the camera body, and clean the body with a soft, clean cloth. After using the camera near sea water, wipe the camera body with a soft, clean cloth slightly moistened with pure water to remove salt, and then dry it with a dry cloth. • Cleaning mirror and lens Use a blower brush to remove dirt and dust from the mirror or lens. To remove fingerprints or smudges, use a soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner. • Do not subject the camera or lens to strong vibration or shock Do not drop the camera body and lens or allow them to hit a hard surface as this may damage the precision mechanisms. • Avoid strong electric or magnetic fields The camera may not function properly in strong electric or magnetic fields such as near a transmitter tower. Avoid using the camera in such locations. • Store the camera in a cool, dry place Store the camera in a cool, dry place to prevent mold and mildew. • Keep it away from naphthalene or camphor (moth repellent), electrical appliances that generate magnetic fields, or excessively hot places such as inside a vehicle during the summer or near a heater. • Avoid extreme temperature changes An extreme temperature change can cause condensation inside the camera body. When taking the camera to a very hot place from a very cold place or vice versa, place it inside an airtight container such as a plastic bag and leave it inside a while to expose the camera gradually to the temperature change. 71