Nokia 002Q942 User Manual - Page 130
x security settings, Wireless LAN plugins, EAP plug-ins
View all Nokia 002Q942 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Settings • WEP key format - Select whether you want to enter the WEP key data in ASCII or Hexadecimal format. • WEP key - Enter the WEP key data. 802.1x security settings Select 802.1x as the WLAN security mode. 802.1x authenticates and authorises devices to access a wireless network, and prevents access if the authorisation process fails. Select WLAN security settings and from the following: • WPA/WPA2 - Select EAP (Extensible Authentication Protocol) or Pre-shared key (a secret key used for device identification). • EAP plug-in settings - If you selected WPA/WPA2 > EAP, select which EAP plug-ins defined in your device to use with the access point. • Pre-shared key - If you selected WPA/WPA2 > Preshared key, enter the shared private key that identifies your device to the WLAN to which you connect. WPA security settings Select WPA/WPA2 as the WLAN security mode. Select WLAN security settings and from the following: • WPA/WPA2 - Select EAP (Extensible Authentication Protocol) or Pre-shared key (a secret key used for device identification). • EAP plug-in settings - If you select WPA/WPA2 > EAP, select which EAP plug-ins defined in your device to 130 use with the access point. • Pre-shared key - If you select WPA/WPA2 > Preshared key, enter the shared private key that identifies your device to the WLAN to which you connect. • WPA2 only mode - To allow both TKIP and AES (Advanced Encryption Standard) encryption, select Off. To allow AES only, select On Wireless LAN plugins Select Menu > Ctrl. panel > Settings and Connection > Destinations, and an access point group. The extensible authentication protocol (EAP) plug-ins are used in wireless networks to authenticate wireless devices and authentication servers, and the different EAP plug-ins make possible the use of various EAP methods (network service). You can view the EAP plug-ins currently installed in your device (network service). EAP plug-ins 1. To define the EAP plug-in settings, select Options > New access point and define an access point that uses WLAN as a data bearer. 2. Select 802.1x or WPA/WPA2 as the security mode. 3. Select WLAN security settings > WPA/WPA2 > EAP > EAP plug-in settings. Use EAP plug-ins To use an EAP plug-in when you connect to a WLAN using the access point, select the desired plug-in and Options > Enable. The EAP plug-ins enabled for use with this access