NordicTrack A.c.t. 10 Elliptical English Manual - Page 12
Pedal Axle Cover when tightening the Screw.
View all NordicTrack A.c.t. 10 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
9. Apply a small amount of grease to the axle on the Left Pedal Arm (14). 9 Position the Left Handlebar Leg (12) as shown. Then, insert the Left Pedal Arm (14) into the Left Handlebar Leg. Attach the Left Pedal Arm (14) with an M10 x 20mm Screw (61), a Pedal Axle Cover (39), and an M10 Washer (64). Tip: Avoid damaging the Pedal Axle Cover when tightening the Screw. Attach the Right Pedal Arm (not shown) in the same way. 12 61 39 64 14 Grease 10. Apply a small amount of grease to the axle on the Left Pedal Arm Bracket (43). 10 Attach the left Pedal Leg (8) to the Left Pedal Arm Bracket (43) with two M10 x 20mm Screws (61). Attach the right Pedal Leg (8) in the same way. See step 6. Tighten the M10 x 20mm Screws (61). See step 5. Tighten the M8 x 13mm Screws (62). 8 Grease 61 43 8 12