NordicTrack Audiostrider 800 Elliptical User Manual - Page 7
Identify the Left Pedal 34 and the Left Pedal
View all NordicTrack Audiostrider 800 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Identify the Left Pedal (34) and the Left Pedal Arm (32), which are marked with stickers. Attach the Left Pedal (34) to the Left Pedal Arm (32) with two M6 x 62mm Screws (108), two M6 x 35mm Screws (109), and four M6 Split Washers (102). Attach the Right Pedal (not shown) to the Right Pedal Arm (not shown) in the same way. 4 34 32 102 109 108 102 109 102 5. Insert the Roller (38) on the Left Pedal Arm (32) and the Roller on the Right Pedal Arm (33) into 5 the sides of the Ramp (5). Attach the Rear Ramp Cover (7) to the Ramp (5) with two M4 x 16mm Screws (97). See the inset drawing. Lift the Pedal Arm Latch (41) on the Left Pedal Arm (32), and set the end of the Left Pedal Arm on the left Crank Bushing Sleeve (54). Release the Pedal Arm Latch, and make sure that the Left Pedal Arm is securely connected to the Crank Bushing Sleeve. Connect the Right Pedal Arm (not shown) to the right Crank Bushing Sleeve (not shown) in the same way. 97 7 33 5 38 32 32 41 54 7