NordicTrack E 3700 Treadmill Uk Manual - Page 7
Insert two Handrail Bolts 78 with Handrail Washers 77
View all NordicTrack E 3700 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Cut the plastic tie holding the Upright Wire Harness (98) in the right Upright (69). Have a second person hold the Handrails (66) near the Uprights (69) as shown. Connect the Upright Wire Harness (98) to the wire harness extending from the Console Base (81). The connectors should slide together easily and snap into place. If they do not, turn one connector and then try again. Insert the connectors and the Upright Wire Harness (98) into the hole in the right Upright (69). Set the Handrails (66) on the Uprights, being careful not to pinch the wires. 4 66 5. Insert two Handrail Bolts (78) with Handrail Washers (77) into the right Upright (69) and the right Handrail (66). Be careful not to damage the Upright Wire Harness (not shown). Next, lift the right Handrail slightly and align the Handrail Bolts with the holes in the Handrail. Thread the Bolts into the Handrail. Do not tighten the Bolts yet. Attach the left Handrail (not shown) in the same way. Then, tighten all four Handrail Bolts (78). 5 66 81 98 98 69 69 77 78 6. Make sure that all parts are properly tightened before you use the treadmill. Place a mat beneath the treadmill to protect the floor. For your benefit, familiarise yourself with the information on pages 28 to 30. 7