NordicTrack E 8.0 Elliptical English Manual - Page 25

If no module is connected, the display will show the words NO IFIT MODULE. If no module is connected, go to step 10. 6. Select an audio setting for the voice of the personal trainer if desired. Press the decrease button to view the audio setting for the voice of the personal trainer. The currently selected audio setting for the voice of the personal trainer will appear in the display. To change the audio setting, press the Enter button repeatedly to turn the voice of the personal trainer ON or OFF. HOW TO USE THE SOUND SYSTEM To play music or audio books through the console sound system while you exercise, plug the included audio cable into the jack on the console and into a jack on your MP3 player or CD player; make sure that the audio cable is fully plugged in. Next, press the play button on your MP3 player or CD player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your MP3 player or CD player. 7. Set the default menu if desired. Press the decrease button to view the default menu setting. The default menu is the menu that will appear when you turn on the console. Press the Enter button repeatedly to select the manual mode menu or the iFit menu as the default menu. 8. Check the status of the iFit module if desired. Press the decrease button to view the iFit status display. The words CHECK WIFI STATUS or CHECK USB STATUS will appear in the display. Then, press the Enter button. After a few seconds, the status of the iFit module will appear in the display. To exit this display, press and hold down the Display button for a few seconds. 9. Check for downloads if desired. Press the decrease button to view the downloads display. The words SEND/RECEIVE DATA will appear in the display. Then, press the Enter button. The console will then check for iFit workouts and firmware downloads. 10. Exit the information mode. Press the Display button to exit the information mode. 25