NordicTrack Elite 14.7 Elliptical English Manual - Page 27
How To Use The Maintenance Mode - machines
View all NordicTrack Elite 14.7 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
HOW TO USE THE MAINTENANCE MODE 1. Select the settings main menu. See step 1 on page 26. incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline. Press the Cancel button to return to the maintenance mode. When the incline is calibrated, touch the Finish button. 2. Select the maintenance mode. In the settings main menu, touch the Maintenance button to enter the maintenance mode. The maintenance mode main screen will show information about the console and the wireless network. 3. Update the console firmware. For the best results, regularly check for firmware updates. Touch the Firmware Update button to check for firmware updates using your wireless network. The update will begin automatically. IMPORTANT: Keep pets, feet, and other objects away from the elliptical while the incline is calibrating. 5. Calibrate the screen. If the screen is not properly calibrated, it will be difficult for you to touch the correct buttons on the screen. To calibrate the screen, touch the Calibrate Screen button. A small target will appear on the screen. Note: Touch the Cancel button to return to the maintenance mode. Using a pencil eraser or other small object, touch the center of the target. Then, touch the rest of the targets. After several seconds, the console will exit the calibration mode. IMPORTANT: To avoid damaging the elliptical, do not turn off the power while the firmware is being updated. The screen will show the progress of the update. When the update is complete, the elliptical will turn off and then turn back on. If it does not, press the power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use. 6. View machine information. Touch the Machine Info button to view information about your elliptical. After you view the information, touch the back button on the screen. 7. Find keycodes. This option is intended to be used by service technicians to identify whether a certain button is working correctly. 4. Calibrate the incline of the ramp. 8. Exit the maintenance mode. Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline of the ramp. The ramp will automatically rise to the maximum To exit the maintenance mode, press the back button on the console or touch the back button on the screen. 27