NordicTrack Elite 14.7 Elliptical English Manual - Page 7

Tip: Avoid pinching the Main Wire 110.

Get NordicTrack Elite 14.7 Elliptical PDF manuals and user guides View all NordicTrack Elite 14.7 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

3. Remove the screws (not shown) and the shipping bracket (not shown) from the rear of the 3 Frame (1). Discard the screws. With the help of a second person, place the ship- ping bracket (not shown) under the rear of the Frame (1). Have the second person hold the Frame to prevent it from tipping while you complete this step. 5 Orient the Rear Stabilizer (5) so that the welded tubes are in the locations shown. Attach the Rear Stabilizer (5) to the Frame (1) with two M10 x 75mm Screws (119). Then, remove and discard the shipping bracket 119 (not shown). 1 Welded Tubes 4. Orient the Rear Stabilizer Cover (2) as shown. 4 Press the Mounts (117) on the underside of the 2 Rear Stabilizer Cover (2) into the Rear Stabilizer (5). Then, press the Rear Stabilizer Cover into place. 117 5 5. Tip: Avoid pinching the Main Wire (110). Have a second person hold the Upright (4) on the 5 Frame (1). Attach the Upright (4) with four M8 x 19mm Screws (82) and four M8 Star Washers (122). 82 4 122 110 1 Avoid pinching the Main Wire (110) 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
7
3
5
1
119
Welded Tubes
3.
Remove the screws (not shown) and the ship-
ping bracket (not shown) from the rear of the
Frame (1). Discard the screws.
With the help of a second person, place the ship-
ping bracket (not shown) under the rear of the
Frame (1).
Have the second person hold the
Frame to prevent it from tipping while you
complete this step.
Orient the Rear Stabilizer (5) so that the welded
tubes are in the locations shown.
Attach the Rear Stabilizer (5) to the Frame (1)
with two M10 x 75mm Screws (119).
Then, remove and discard the shipping bracket
(not shown).
4
5
2
117
4.
Orient the Rear Stabilizer Cover (2) as shown.
Press the Mounts (117) on the underside of the
Rear Stabilizer Cover (2) into the Rear Stabilizer
(5). Then, press the Rear Stabilizer Cover into
place.
5
Avoid pinching the
Main Wire (110)
1
82
4
122
110
5.
Tip: Avoid pinching the Main Wire (110).
Have
a second person hold the Upright (4) on the
Frame (1).
Attach the Upright (4) with four M8 x 19mm
Screws (82) and four M8 Star Washers (122).