NordicTrack Elite 4000 Treadmill Uk Manual - Page 10

careful not to pinch the Upright Coaxial Cable, the Upright Wire 83, or the fan wire B.

Get NordicTrack Elite 4000 Treadmill PDF manuals and user guides View all NordicTrack Elite 4000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

6. Hold the Tray (79) near the right Upright (84). Wrap the tie in the hole in the side of the Upright 6 B 79 around the end of the fan wire (B). Pull the fan wire into the hole and out of the top of the Upright. Then, remove the tie. Identify the #8 x 3/4" Screws (5). IMPORTANT: Hole Do not confuse the #8 x 3/4" Screws with the #8 x 3/4" Truss Head Screws (24). The #8 x 3/4" Truss Head Screws have flatter heads. Tie 5 76 5 Attach the Tray (79) to the Upright Crossbar (76) with four #8 x 3/4" Screws (5). Start all four Screws, and then tighten them. 84 7. Attach the two Handrails (74) to the Uprights (84) with two of the 5/16" x 2" Screws (2) that you removed in step 3 and two 5/16" Star Washers (8). Do not fully tighten the Screws yet. Be careful not to pinch the Upright Coaxial Cable (78), the Upright Wire (83), or the fan wire (B). Position the wires as shown. Then, remove and discard the two indicated screws (C). 7 2 8 C 74 78 84 2 74 B 83 8 C 84 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
10
6.
Hold the Tray (79) near the right Upright (84).
Wrap the tie in the hole in the side of the Upright
around the end of the fan wire (B). Pull the
fan wire into the hole and out of the top of the
Upright. Then, remove the tie.
Identify the #8 x 3/4" Screws (5).
IMPORTANT:
Do not confuse the #8 x 3/4" Screws with the
#8 x 3/4" Truss Head Screws (24). The #8 x
3/4" Truss Head Screws have flatter heads.
Attach the Tray (79) to the Upright Crossbar (76)
with four #8 x 3/4" Screws (5).
Start all four
Screws, and then tighten them.
6
5
84
Tie
B
76
5
79
Hole
7.
Attach the two Handrails (74) to the Uprights (84)
with two of the 5/16" x 2" Screws (2) that you
removed in step 3 and two 5/16" Star Washers
(8).
Do not fully tighten the Screws yet. Be
careful not to pinch the Upright Coaxial Cable
(78), the Upright Wire (83), or the fan wire (B).
Position the wires as shown.
Then, remove and discard the two indicated
screws (C).
C
78
84
74
8
7
2
B
C
83
74
8
2
84