NordicTrack Elite 4000 Treadmill Uk Manual - Page 12
May Become Damaged When You Turn, If You Do Not Connect
View all NordicTrack Elite 4000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
10. W ith the help of a second person, hold the console assembly (D) near the Handrails (74). See the inset drawing. Connect the Upright Wire (83) to the console wire (F). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Next, connect the two fan wires (B, G). Then, remove any wire ties from the Upright Wire (83) and the fan wires. Connect the two coaxial cables on the other side (not shown). Insert the excess cable and fan wire into the Upright (84). 10 D F 83 74 G B 84 11. Attach the console assembly (D) to the Handrails (74) with four 5/16" x 2" Screws (2) and four 11 D 5/16" Star Washers (8). Start all four Screws, and then tighten them. Be careful not to pinch the wires and cables. Insert the wires and cables upward into the console assembly (D). 74 8 Wires 2 F 83 74 Cables 8 2 12