NordicTrack Elite 7000 Treadmill English Manual - Page 7
Slide the Right Upright Sleeve onto the Right
View all NordicTrack Elite 7000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Identify the Left Upright (73) and the Right Upright (74). Have a second person hold the Right Upright (74) near the Right Base Cover (77). See the inset drawing. Locate the wire tie in the rectangular hole in the bottom of the Right Upright. Tie the wire tie securely around the end of the Upright Wire Harness (75). Pull the other end of the wire tie until the Upright Wire Harness is routed completely through the Right Upright. Gently pull up on the Upright Wire Harness (75) as you set the Right Upright (74) on the Base (83) inside the Right Base Cover (77). Be careful not to pinch the Upright Wire Harness. Attach the Right Upright (74) to the Base (83) with two Upright Bolts (72) and two Upright Star Washers (90); do not tighten the Upright Bolts yet. Note: If necessary, tip the upper end of the Right Upright forward slightly as you thread the Upright Bolts into the Right Upright. Attach the Left Upright (73) to the Base (83) with two Upright Bolts and two Upright Star Washers (not shown); do not tighten the Upright Bolts yet. With the help of a second person, lower the treadmill off the cardboard stand. 2 73 3. Identify the Right Upright Sleeve (96) and the Left Upright Sleeve (95), which are labeled. Slide the Right Upright Sleeve onto the Right Upright (74). Slide the Left Upright Sleeve onto the Left Upright (73). 3 73 Wire Tie 74 75 Wire Tie 75 74 77 83 90 72 95 "Left" "Right" 96 74 7