NordicTrack Elite 7000 Treadmill English Manual - Page 9
Slide the Right Upright Sleeve 96 up against
View all NordicTrack Elite 7000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Partially tighten three Handrail Bolts (64) with three Upright Star Washers (90) into the Right Upright (74). Next, partially tighten three Handrail Bolts with three Upright Star Washers (not shown) into the Left Upright (73). Then, firmly tighten the six Handrail Bolts. 6 73 90 64 64 90 74 7. Slide the Right Upright Sleeve (96) up against the console assembly. Attach the Right Upright 7 Sleeve with two 3/4" Screws (4). Attach the Left Upright Sleeve (not shown) to the Left Upright (73) as described above. 73 4 96 4 74 8. With the help of a second person, raise the front of the treadmill and insert the crossbar on the 8 Base (83) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill to prevent it from moving forward or backward. Firmly tighten the four Upright Bolts (72). With the help of a second person, lower the treadmill off the cardboard stand. 83 72 72 Cardboard Stand 9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 26 and 27). To protect the floor or carpet from damage, place a mat under the treadmill. 9