NordicTrack Elite 9500 Treadmill User Manual - Page 10

7. Slide the Right Upright Sleeve (96) up against the console assembly. Attach the Right Upright 7 Sleeve with two #8 x 3/4" Tek Screws (29). Attach the Left Upright Sleeve (not shown) to the console assembly in the same way. Console Assembly 29 96 29 8. Orient the Storage Latch (100) so that the large barrel and the Latch Knob (118) are in the posi- 8 tions shown. Remove the tie from the upper end of the Storage Latch (100). Attach the upper end of the Storage Latch to the bracket on the Frame (48) with a 3/8" x 1 3/4" Bolt (117) and a 3/8" Nut (38). Remove the tie from the lower end of the Storage Latch (100). Keep the holes in the Latch Cap (119) aligned with the holes in the Storage Latch. Make sure to keep the Latch Cap inside the Storage Latch. Attach the Storage Latch to the bracket on the Base (83) with a 3/8" x 2" Bolt (113) and a 3/8" Nut (38). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the bracket. Lower the Frame (48) (see HOW TO LOWER THE TREADMILL FOR USE on page 30). 48 38 118 117 100 Large Barrel 83 38 119 113 10