NordicTrack Elite 9500 Treadmill User Manual - Page 9

4. With the help of a second person, hold the console assembly near the Uprights (73, 74). Connect the Upright Wire Harness (75) to the Console Wire Harness (71). See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Remove the wire tie from the Upright Wire Harness. 4 Console Assembly 71 75 73 75 Wire Tie 71 74 5. Connect the TV Cable (49) and the AV Wire (97) to the cables extending from the console assembly. Then, insert the connectors down into the Uprights (73, 74). 5 Console Assembly 99 Next, insert the brackets on the Handrail (99) into the Uprights (73, 74). Make sure that no wires are pinched. 49 97 73 99 6. Partially tighten three 3/8" x 1 1/4" Bolts (64) with three 3/8" Star Washers (90) into the Right Upright (74). Next, partially tighten three 3/8" x 1 1/4" Bolts with three 3/8" Star Washers (not shown) into the Left Upright (73). Then, firmly tighten the six Bolts. 6 73 74 90 64 64 90 74 9