NordicTrack Grt240 English Manual - Page 10
Press 25.4mm Round Inner Caps 12 into the Weight
View all NordicTrack Grt240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
13. Press 25.4mm Round Inner Caps (12) into the Weight 13 Rests (21, 40) and the Safety Spotters (9, 48). Insert the Weight Rests (21, 40) into the Uprights (1). Make sure that the Weight Rests are at the same height and that the locking clips are hooked around the Uprights. Next, insert the Safety Spotters (9, 48) into the Uprights (1). Make sure that the Safety Spotters are at the same height and that the locking clips are hooked around the Uprights. The Safety Spotters must be a few holes lower than the Weight Rests (21, 40). 12 21 12 9 1 1 40 12 48 14. Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTING THE WEIGHT BENCH, beginning on the next page. 10