NordicTrack Gx 3.1 Bike Uk Manual - Page 10

and four M8 Split Washers 75.

Get NordicTrack Gx 3.1 Bike PDF manuals and user guides View all NordicTrack Gx 3.1 Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

9. Slide the Front Shield Cover (7) upward onto the Upright (4). 9 While another person holds the Upright (4) near the Frame (1), connect the Extension Wire (59) to the Wire Harness (58). Insert the Upright (4) into the Frame (1). Tip: Avoid pinching the wires. Attach the Upright (4) with four M8 x 16mm Screws (74) and four M8 Split Washers (75). Slide the Front Shield Cover (7) downward to the Frame (1) and press it into place. Avoid pinching the wires 4 7 59 74 75 1 58 75 74 10. Identify the Right Pedal (21). 10 Using an adjustable wrench, firmly tighten the Right Pedal (21) clockwise into the Right Crank Arm (19). Tighten the Left Pedal (not shown) counterclockwise into the Left Crank Arm (not shown). Adjust the strap on the Right Pedal (21) to the desired position, and press the ends of the straps onto the tabs on the Right Pedal. Adjust the strap on the Left Pedal (not shown) in the same way. 19 Strap 21 Tab 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
10
9
10
75
75
74
74
58
59
9.
Slide the Front Shield Cover (7) upward onto the
Upright (4).
While another person holds the Upright (4) near
the Frame (1), connect the Extension Wire (59)
to the Wire Harness (58).
Insert the Upright (4) into the Frame (1).
Tip: Avoid pinching the wires.
Attach the
Upright (4) with four M8 x 16mm Screws (74)
and four M8 Split Washers (75).
Slide the Front Shield Cover (7) downward to the
Frame (1) and press it into place.
4
7
1
Avoid pinching
the wires
10. Identify the Right Pedal (21).
Using an adjustable wrench,
firmly tighten
the
Right Pedal (21)
clockwise
into the Right Crank
Arm (19).
Tighten the Left Pedal (not shown)
counter-
clockwise
into the Left Crank Arm (not shown).
Adjust the strap on the Right Pedal (21) to the
desired position, and press the ends of the
straps onto the tabs on the Right Pedal.
Adjust
the strap on the Left Pedal (not shown) in the
same way.
19
Strap
Tab
21