NordicTrack Viewpoint 3000 Treadmill User Manual - Page 10
Aged When The Power Is Turned On.
View all NordicTrack Viewpoint 3000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. Remove the band securing the Upright Wire Harness (73) to the right Upright (85). Have a second person hold the console assembly near the right Upright. Connect the Upright Wire Harness (73) to the wire harness on the console assembly. Make sure to connect the connectors properly (see the inset drawing). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Then, insert the connectors into the right Upright (85). 8 Console Assembly 73 85 9. Remove the band securing the TV Cable (112) to 9 the left Upright (85). Connect the TV Cable to the cable extending from the console assembly. Then, insert the TV Cable into the left Upright. Next, insert the brackets on the Handrails (70) into the left Upright (85) and the right Upright (not shown). Make sure that no wires are pinched. Console Assembly 10. Attach the console assembly to the Uprights (85) with four Console Bolts (72) and four 3/8" 10 Star Washers (67) (only one side is shown). Start all four Console Bolts and then tighten them. 73 Bracket 70 112 85 85 72 Console 67 Assembly 10