NordicTrack Viewpoint 3000 Treadmill User Manual - Page 13
How To Connect A Dvd Player Or A Vcr - user manual
View all NordicTrack Viewpoint 3000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Before the personal television can be used, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill frame. Note: No antenna, cable, or adapter is included. HOW TO CONNECT AN ANTENNA 300 Ohm Flat Wire Indoor Antenna 1. Place a VHF antenna in the desired location. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter. 2. Push the 300 ohm to 75 ohm adapter onto the 75 ohm antenna terminal on the treadmill frame near the power cord. Screwdriver VHF 300 Ohm Flat Wire 300 to 75 Ohm Adapter VHF Antenna 300 to 75 Ohm Adapter 75 Ohm Terminal 1. See the drawing near the bottom of this page. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter. 2. Push the 300 ohm to 75 ohm adapter onto the 75 ohm antenna terminal on the treadmill frame near the power cord. 75 Ohm CATV Cable 1. See the drawing near the bottom of this page. Connect the 75 ohm CATV cable from the antenna to the 75 ohm antenna terminal on the treadmill frame near the power cord. HOW TO CONNECT A 75 OHM CATV CABLE 1. Connect a 75 ohm CATV cable to the 75 ohm antenna terminal on the treadmill frame near the power cord. 75 Ohm CATV Cable 75 Ohm Terminal Outdoor Antenna Note: Outdoor antennas are subject to weathering that can reduce signal quality. Inspect your antenna and the lead-in wiring before connecting the antenna. HOW TO CONNECT A VCR 1. Connect one end of a 75 ohm CATV cable to the video output jack on your VCR. 2. Plug in the power cord of your VCR. See your VCR user's manual for proper grounding instructions. Combination VHF/UHF Antennas 300 Ohm Flat Wire 300 to 75 Ohm Adapter 75 Ohm Terminal 75 Ohm CATV Cable 75 Ohm CATV Cable 3. Connect the 75 ohm CATV cable to the 75 ohm antenna terminal on the treadmill frame near the power cord. HOW TO CONNECT A DVD PLAYER OR A VCR Plug the three-pronged end of an RCA component audio/video cable into your DVD player or VCR, and plug the other end into the audio/video input jack on the back of the console base. HOW TO CONNECT A PERSONAL AUDIO/VIDEO PLAYER DIRECTLY TO THE CONSOLE Locate the audio/video plug below the television on the console, and plug it into a jack on your MP3 player, CD player, or personal video player. 13