NordicTrack Viewpoint 3000 Treadmill User Manual - Page 23
How To Use An Ifit Card
View all NordicTrack Viewpoint 3000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
HOW TO USE AN IFIT CARD 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 16. 2 Identify yourself as user 1 or user 2. See step 2 on page 16. 3 Insert an iFIT Card and select a program. To use an iFIT program, insert an iFIT Card into the iFIT slot; make sure that the iFIT Card is oriented so the metal contacts are face down and are inside the iFIT slot. iFIT Slot iFIT Card Next, select an iFIT program by pressing the increase and decrease buttons next to the iFIT indicator. When an iFIT program is selected, the display will show the name of the program, the maximum incline and speed settings of the program, and the program time. In addition, a profile of the speed settings of the program will appear on the screen. Each program is divided into several one-minute segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed setting and/or incline setting may be programmed for two or more consecutive segments. 4 Press the Start button to start the program. A moment after the button is pressed, the treadmill will automatically adjust to the first speed and incline settings of the program. Hold the handrails and begin walking. During the program, the voice of a personal trainer will guide you through the workout. Note: If the AUDIO TRAINER: OFF setting is selected (see step 1 on page 25), the personal trainer's voice will not be heard. If the speed settings and/or incline settings are too high or too low, you can override the settings by pressing the Speed and/or Incline buttons; however, when the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings programmed for the next segment. To stop the program at any time, press the Stop button. To restart the program, press the Start button. The walking belt will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings programmed for the next segment. 5 Select a display mode and follow your progress with the exercise information on the screen. See step 6 on page 17. 6 Measure your heart rate if desired. See step 7 on page 17. 7 Turn on the fan if desired. See step 8 on page 17. 8 When you are finished exercising, remove the key from the console. See step 8 on page 18. CAUTION: Always remove iFIT Cards from the iFIT slot when you are not using them. 23