NordicTrack Viewpoint 3000 Treadmill User Manual - Page 12
If you purchase the optional chest pulse sensor see follow the steps below to install
View all NordicTrack Viewpoint 3000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
If you purchase the optional chest pulse sensor (see page 26), follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated 3/4" Screws (7) from the 1 back of the Console Base (98). 105 98 7 7 7 7 7 7 7 2. While a second person holds the Console (105), connect the wire on the receiver (A) to the indicated wire extending from the Console. Next, hold the receiver so the small cylinder is oriented as shown and is facing away from the Console. Attach the receiver to the Console in the location shown with the two included Small Screws (B). 3. Make sure that no wires are pinched. See drawing 1. Reattach the Console (105) to the Console Base (98) with the 3/4" Screws (7). Discard the other wires included with the receiver. 2 Wire A Receiver 98 105 Cylinder B 12