NordicTrack Vx9000 English Manual - Page 23

THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode. To select the information mode, hold down the STOP button while inserting the key into the console. When the information mode is selected, the main display will show the following information: The left side of the main display will show the total number of hours that the treadmill has been used. The center of the main display will show the total distance that the walking belt has moved. The right side of the main display will show an E for English miles or an M for metric kilometers. Press the SPEED + button to change the unit of measurement. IMPORTANT: Make sure that there is not a letter D in the main display. If a D appears, the console is in the "demo" mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a D appears in the display when the information mode is selected, press the SPEED - button so the display is blank. To exit the information mode, remove the key from the console. 23