Oki B6250n B6250 Network Guide - Page 20

3. Registering a logical PostScript printer PS01 set using the EWS. #lpadmin -p P003 -s printer1\!PS01 NOTE > Enter the host name and printer name of the remote host after -s by linking with !. The printer name corresponds to the print language/mode. > The output style may be specified at the same time. The parameters for specifying a style are the same as those available for the -C option. As the example of (2) shows, insert "_" between the printer name and output parameters. You can enter up to 14 characters. > If PS%n or PLT%nH is specified for the printer name as in the example of (3), however, the printer does not operate normally with an output style different from the preset one. > Set a printer name corresponding to the print language/ mode and output style. Refer to: • Manuals, such as online manuals, that came with various workstations. PRINT (LP) The "lp" command is used for printing. COMMAND FORMAT lp [-d Printer name] [-n No. of copies] File name COMMAND OPTIONS The following command options are available: -d Printer name Specify the printer name registered by the "lpadmin" command as the -d option. If this option is omitted, the default printer lp will be specified. B6250 Network Guide> 18