Oki C3600n C3600 Setup Guide (Eng, Fr, SP, BPort) - Page 6

Power Up - toner

Get Oki C3600n PDF manuals and user guides View all Oki C3600n manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

4 Load the paper (maximum 250 sheets 20-lb. [80 g/m2] paper). 5 Make sure the paper width stoppers are snug against the paper and are locked in place. NOTE: Do not fill above paper full indicator (A). Power Up Insert the power cable (be sure to use only the power cable supplied with your printer), then plug it directly into a grounded wall outlet and turn on the printer. Do not connect the USB or network cable at this time. A 6 Gently close the paper tray. Install the Handy Reference Guide Remove the backing from the VELCRO® strip on the back of the Handy Reference Guide and mount it on the side of the printer. Alarm at power on? If an alarm (amber light) displays on the printer, do the following: 1 Make sure paper is loaded in the printer. 2 Turn the printer off and on again. 3 Make sure the toner lock levers are in the locked position. See step 4 "Install Image Drum/Toner Cartridges" on page 4. 4 Reinstall the drum/toner units. Make sure the toner lock levers are in the locked position. If the alarm does not clear, complete the steps to install the printer software. When the software is installed, open the status monitor for an explanation of the alarm. C3600n Setup Guide 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
C3600n Setup Guide
6
4
Load the paper (maximum 250 sheets
20-lb. [80 g/m
2
] paper).
5
Make sure the paper width stoppers
are snug against the paper and are
locked in place.
NOTE:
Do not fill above paper full indicator (A).
6
Gently close the paper tray.
Install the Handy Reference
Guide
Remove the backing from the
VELCRO
®
strip on the back of the Handy Reference
Guide and mount it on the side of the
printer.
Power Up
Insert the power cable
(be sure to use
only the power cable supplied with
your printer)
, then plug it directly into a
grounded wall outlet and turn on the
printer.
Do not connect the USB or
network cable at this time.
Alarm at power on?
If an alarm (amber light) displays on the
printer, do the following:
1
Make sure paper is loaded in the
printer.
2
Turn the printer off and on again.
3
Make sure the toner lock levers are in
the locked position. See step 4 “Install
Image Drum/Toner Cartridges” on
page 4.
4
Reinstall the drum/toner units. Make
sure the toner lock levers are in the
locked position.
If the alarm does not clear, complete the
steps to install the printer software.
When the software is installed, open the
status monitor for an explanation of the
alarm.
A