Oki C3600n C3600 Network User's Guide (English) - Page 60
NetBEUI Protocol, Network Printer Settings, Windows XP
View all Oki C3600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
9. When the settings are correct, click Execute. The new settings are transmitted to the network interface but it still operates with pre-transmission settings. 10. Click Finish to validate the new settings. 11. Switch the printer off for 15 seconds and on again. Now that both Windows and the printer have been configured to use TCP/IP, the next step is to configure Windows to print to the network printer. NetBEUI Protocol Network Printer Settings There are two configurable items under NetBEUI within the printer. These can be configured using the standard set-up utility described in "Device setup" on page 18. Computer Name Name assigned to the printer Workgroup PrintServer1 Comment User definable description 1. Although the workgroup name can be changed, it is recommended that it remains as PrintServer. Although there are some differences in configuration options between the various Windows platforms, the procedure for printing using NetBEUI is the same. Please ensure the NetBEUI protocol has been installed in Windows. This can be confirmed by checking the network settings. If NetBEUI has not been installed please refer to the section below. The relevant Windows installation CD may be required and you should follow the on-screen dialog box prompts. Windows XP Although you can install the NetBEUI protocol into Windows XP, it may not be supported. You should be able to use NetBEUI on LAN connections although you will not be able to use this on a Remote Access Service Connections. 1. In the Start menu, select Settings then Control Panel. Network User's Guide 60