Oki C9600n Guide: Printing C9600 - Page 69
Windows
View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
WINDOWS PCL 1. In the driver's [Setup] tab, recall any saved [driver settings] you may wish to use. 2. Choose [Booklet] from the [Finishing Mode] drop-down list, then click [Options]. 3. In the Options window you can set the [signature] size (see page 67, the number of [pages] per side of paper and the [binding margin] if your document is going to be thick. The graphic in this window shows the effect of each choice you make. NOTE If the Booklet choice is not shown, check that the Duplex option is enabled in the driver. (See "Setting the driver device options" on page 9.) C9600 Printing Guide> 69
C9600 Printing Guide> 69
W
INDOWS
PCL
1.
In the driver’s [Setup] tab, recall any saved [driver settings]
you may wish to use.
2.
Choose [Booklet] from the [Finishing Mode] drop-down list,
then click [Options].
3.
In the Options window you can set the [signature] size (see
page 67, the number of [pages] per side of paper and the
[binding margin] if your document is going to be thick. The
graphic in this window shows the effect of each choice you
make.
NOTE
If the Booklet choice is not shown, check that the Duplex option is
enabled in the driver. (See “Setting the driver device options” on
page 9.)