Oki C9600n Guide: Printing C9600 - Page 87
Uplex, Double, Sided, Printing
View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
DUPLEX (DOUBLE-SIDED) PRINTING If your printer has a duplex unit installed you can print on both sides of the paper, to save paper, weight, bulk and cost. > Only paper can be used for duplex printing, not transparencies or other media. > Use paper stock of 75-120 g/m². If you experience excessive curling with 75-90 g/m² paper, use 105 g/m². > Use standard sized paper stock only, e.g. A4, A3, Letter, etc. > Load the paper print side up. Ream wrappers are usually marked with an arrow, indicating which is the print side. > Paper can be fed from standard paper trays, including the high capacity feeder if you have one, but not from the multipurpose tray. > Do not set the paper weight to Ultra Heavy. > Do not enable the White Page Skip function. WINDOWS POSTSCRIPT 1. In the driver's Layout tab (Windows XP) or Setup tab (Windows 98), under [2-Sided Printing], select the binding edge you want. WINDOWS XP WINDOWS 98 For portrait (tall) page layout the usual choice is [Long Edge]. For landscape (wide) page layout the usual choice is [Short C9600 Printing Guide> 87