Oki MB480 Print Job Accounting Users Manual - Page 30
Auto Export Logs, and Flash Memory
View all Oki MB480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
2. Setting up the server software Inhibit the initialization of the Hard Disk and Flash Memory Check this check box to prevent the printer built- SNMP Setting Set the community name that is used for authentication to manage printers by SNMP in hard disk, SD memory card, and flash memory communication. from being initialized. When Print Job Accounting 2 is used, always check this check box. • Read Specify the read community name for the Auto Export Logs Set to automatically write the acquired log to a CSV format file, and send the file via e-mail. server software. • Write Specify the write community name for the server software. • Do not automatically export • Retry Automatic export is not performed. Specify the number of times to retry the • Automatically export logs The acquired log is automatically written as a CSV format file to the automatic export destination. • Mail logs to administrator SNMP get or set operation. This setting is effective only on some models. • Timeout Specify the timeout for the retries of the SNMP get or set operation. This setting is effective only on some models. The acquired log is automatically written as a CSV format file to the automatic export destination, and the file is sent by e-mail to the administrator. • Read Community Specify the read community name for traps. This setting is effective only on some models. • Write Community Record logs in a database (Only Enterprise edition) Specify the write community name for traps. This setting is effective only on some models. Check to export the acquired log to a database. Acquire Only Logs (do not use restrictions) • Trap Port Specify the Trap log receiving port. This setting is effective only on some models. Check this check box when you do not want to automatically activate access restrictions for models that have an access restriction function on the control panel. Note! Users cannot be registered. Start acquiring the log immediately after adding Check this check box to start acquiring the log after adding a printer. ❹ When the "Please enter the administrator password of the printer" window is displayed, enter the printer administrator password, and click [OK]. Note! • Depending on the printer, this is not displayed. • For details on the factory set printer administrator password, see the User's Manual of the printer. Next, the "Job Account ID registration" window is displayed. - 30 -